Difference between revisions of "Module:Documentation/config"

From skaldsong companion
(Created page with "Our research, based on the going crazy reviews from actual consumers, discovered that these 3 brand names in the below are the ones that appreciated on the market. The compoun...")
 
m (1 revision imported)
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
Our research, based on the going crazy reviews from actual consumers, discovered that these 3 brand names in the below are the ones that appreciated on the market. The compound has actually been found through considerable research which was carried out on pure garcinia cambogia essence to have a better [http://del.icio.us/premiumgc garcinia cambogia fruit where to buy in south africa] understanding and also study of the compound that has shown to have opened new frontiers in the area of clinical scientific research that can aid people in decreasing their weight in a effective and also entirely natural  way without undergoing much headache.<br><br>Do not obtain misleaded by lower effectiveness Garcinia cambogia extract Pure 1500mg or 50 HCA Our 100% NATURAL, PREMIUM blend of Pure Garcinia cambogia extract ingredients are as adheres to: 1 Serving (2 Easy-to-swallow Veggie Capsules) Key FAT BURNING/APPETITE SUBDUING Ingredients: Garcinia Cambogia (Fruit Peel) Essence (60% HCA) 1600mg (800mg each capsule - 60% more than our rivals) Potassium 80mg to support weight loss.<br><br>Verdict is Garcinia cambogia extract really functions however patience as well as devotion in taking the tablet must be exercised. Garcinia cambogia extract is offered in two states: top-quality exceptional state and substance supplement state. There are a ton of gimmick Garcinia cambogia extract brand names around that sell cheaply-made items that have plenty of binders and filler compounds.<br><br>Results will always vary for individuals, relying on the individual's physical condition, lifestyle, and also diet. This study was not completed on any type of particular brand (Pure Garcinia Elite, Garcinia Cambogia And also, Tropical Garcinia, Purely Influenced Garcinia Cambogia), but outcomes are likely the very same for this ingredient throughout all items.<br><br>No, you don't should work out when you use garcinia cambogia for weight management, but you must think about consisting of health and fitness to make best use of outcomes. Inning accordance with researchers, the dosage of Garcinia considered hazardous for human intake surpasses 5000mg. The irresistible advantages of Garcinia Cambogia could now be gettinged develop the extracts readily offered in the market as they catch all the benefits of this sour fruit in every dose. Results with garcinia cambogia is generally based on the quality of the garcinia cambogia remove you purchase. It doesn't include any type of binders or fillers as well as includes a healthy mix of potassium as well as calcium salts for optimum absorption of the HCA. Clinical researches were also conducted to humans as well as outcomes revealed that it provides a sensation of fullness or satiation, hence consume less.<br><br>Garcinia Cambogia seemed to target that fat specifically, which was a win-win for me as I didn't wish to shed any from my breast or butt. Label should have GC on it - Make sure to only buy supplements that remain in bottles with tags that claim Garcinia Cambogia on the tag. The appropriate use Garcinia Cambogia together with medicine would result in decreased blood glucose and also LDL degrees as well. It's rarely you could locate something that helps you drop weight without transforming your diet or workout behaviors, however Garcinia cambogia extract appears to do just that. This happens as the remove stimulates the endocrine system to produce even more serotonin.<br><br>Finest Diets 2017 has actually taken the effort to bring you the most detailed evaluation on Garcinia cambogia extract Pure Remove readily available.. There are two crucial medical trials carried out to verify the efficiency of Garcinia Cambogia (with HCA levels of 95%). Real Garcinia Cambogia has actually been kept in mind to have been 'well tolerated' for approximately 12 weeks in human trials.
+
----------------------------------------------------------------------------------------------------
 +
--
 +
--                              Configuration for Module:Documentation
 +
--
 +
-- Here you can set the values of the parameters and messages used in Module:Documentation to
 +
-- localise it to your wiki and your language. Unless specified otherwise, values given here
 +
-- should be string values.
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
local _format = require('Module:TNT').format
 +
local function format(id)
 +
return _format('I18n/Documentation', id)
 +
end
 +
 
 +
local cfg = {} -- Do not edit this line.
 +
 
 +
cfg['templatestyles-scr'] = 'Module:Documentation/styles.css'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Protection template configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['protection-template']
 +
-- The name of the template that displays the protection icon (a padlock on enwiki).
 +
cfg['protection-template'] = 'pp-template'
 +
 
 +
-- cfg['protection-reason-edit']
 +
-- The protection reason for edit-protected templates to pass to
 +
-- [[Module:Protection banner]].
 +
cfg['protection-reason-edit'] = 'template'
 +
 
 +
--[[
 +
-- cfg['protection-template-args']
 +
-- Any arguments to send to the protection template. This should be a Lua table.
 +
-- For example, if the protection template is "pp-template", and the wikitext template invocation
 +
-- looks like "{{pp-template|docusage=yes}}", then this table should look like "{docusage = 'yes'}".
 +
--]]
 +
cfg['protection-template-args'] = {docusage = 'yes'}
 +
 
 +
--[[
 +
----------------------------------------------------------------------------------------------------
 +
-- Sandbox notice configuration
 +
--
 +
-- On sandbox pages the module can display a template notifying users that the current page is a
 +
-- sandbox, and the location of test cases pages, etc. The module decides whether the page is a
 +
-- sandbox or not based on the value of cfg['sandbox-subpage']. The following settings configure the
 +
-- messages that the notices contains.
 +
----------------------------------------------------------------------------------------------------
 +
--]]
 +
 
 +
-- cfg['sandbox-notice-image']
 +
-- The image displayed in the sandbox notice.
 +
cfg['sandbox-notice-image'] = '[[Image:Edit In Sandbox Icon - Color.svg|40px|alt=|link=]]'
 +
 
 +
--[[
 +
-- cfg['sandbox-notice-pagetype-template']
 +
-- cfg['sandbox-notice-pagetype-module']
 +
-- cfg['sandbox-notice-pagetype-other']
 +
-- The page type of the sandbox page. The message that is displayed depends on the current subject
 +
-- namespace. This message is used in either cfg['sandbox-notice-blurb'] or
 +
-- cfg['sandbox-notice-diff-blurb'].
 +
--]]
 +
cfg['sandbox-notice-pagetype-template'] = format('sandbox-notice-pagetype-template')
 +
cfg['sandbox-notice-pagetype-module'] = format('sandbox-notice-pagetype-module')
 +
cfg['sandbox-notice-pagetype-other'] = format('sandbox-notice-pagetype-other')
 +
 
 +
--[[
 +
-- cfg['sandbox-notice-blurb']
 +
-- cfg['sandbox-notice-diff-blurb']
 +
-- cfg['sandbox-notice-diff-display']
 +
-- Either cfg['sandbox-notice-blurb'] or cfg['sandbox-notice-diff-blurb'] is the opening sentence
 +
-- of the sandbox notice. The latter has a diff link, but the former does not. $1 is the page
 +
-- type, which is either cfg['sandbox-notice-pagetype-template'],
 +
-- cfg['sandbox-notice-pagetype-module'] or cfg['sandbox-notice-pagetype-other'] depending what
 +
-- namespace we are in. $2 is a link to the main template page, and $3 is a diff link between
 +
-- the sandbox and the main template. The display value of the diff link is set by
 +
-- cfg['sandbox-notice-compare-link-display'].
 +
--]]
 +
cfg['sandbox-notice-blurb'] = format('sandbox-notice-blurb')
 +
cfg['sandbox-notice-diff-blurb'] = format('sandbox-notice-diff-blurb')
 +
cfg['sandbox-notice-compare-link-display'] = format('sandbox-notice-compare-link-display')
 +
 
 +
--[[
 +
-- cfg['sandbox-notice-testcases-blurb']
 +
-- cfg['sandbox-notice-testcases-link-display']
 +
-- cfg['sandbox-notice-testcases-run-blurb']
 +
-- cfg['sandbox-notice-testcases-run-link-display']
 +
-- cfg['sandbox-notice-testcases-blurb'] is a sentence notifying the user that there is a test cases page
 +
-- corresponding to this sandbox that they can edit. $1 is a link to the test cases page.
 +
-- cfg['sandbox-notice-testcases-link-display'] is the display value for that link.
 +
-- cfg['sandbox-notice-testcases-run-blurb'] is a sentence notifying the user that there is a test cases page
 +
-- corresponding to this sandbox that they can edit, along with a link to run it. $1 is a link to the test
 +
-- cases page, and $2 is a link to the page to run it.
 +
-- cfg['sandbox-notice-testcases-run-link-display'] is the display value for the link to run the test
 +
-- cases.
 +
--]]
 +
cfg['sandbox-notice-testcases-blurb'] = format('sandbox-notice-testcases-blurb')
 +
cfg['sandbox-notice-testcases-link-display'] = format('sandbox-notice-testcases-link-display')
 +
cfg['sandbox-notice-testcases-run-blurb'] = format('sandbox-notice-testcases-run-blurb')
 +
cfg['sandbox-notice-testcases-run-link-display'] = format('sandbox-notice-testcases-run-link-display')
 +
 
 +
-- cfg['sandbox-category']
 +
-- A category to add to all template sandboxes.
 +
cfg['sandbox-category'] = 'Template sandboxes'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Start box configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['documentation-icon-wikitext']
 +
-- The wikitext for the icon shown at the top of the template.
 +
cfg['documentation-icon-wikitext'] = '[[File:Test Template Info-Icon - Version (2).svg|50px|link=|alt=Documentation icon]]'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Link box (end box) configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['transcluded-from-blurb']
 +
-- Notice displayed when the docs are transcluded from another page. $1 is a wikilink to that page.
 +
cfg['transcluded-from-blurb'] = format('transcluded-from-blurb')
 +
 
 +
--[[
 +
-- cfg['create-module-doc-blurb']
 +
-- Notice displayed in the module namespace when the documentation subpage does not exist.
 +
-- $1 is a link to create the documentation page with the preload cfg['module-preload'] and the
 +
-- display cfg['create-link-display'].
 +
--]]
 +
cfg['create-module-doc-blurb'] = format('create-module-doc-blurb')
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Experiment blurb configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
--[[
 +
-- cfg['experiment-blurb-template']
 +
-- cfg['experiment-blurb-module']
 +
-- The experiment blurb is the text inviting editors to experiment in sandbox and test cases pages.
 +
-- It is only shown in the template and module namespaces. With the default English settings, it
 +
-- might look like this:
 +
--
 +
-- Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages.
 +
--
 +
-- In this example, "sandbox", "edit", "diff", "testcases", and "edit" would all be links.
 +
--
 +
-- There are two versions, cfg['experiment-blurb-template'] and cfg['experiment-blurb-module'], depending
 +
-- on what namespace we are in.
 +
--
 +
-- Parameters:
 +
--
 +
-- $1 is a link to the sandbox page. If the sandbox exists, it is in the following format:
 +
--
 +
--    cfg['sandbox-link-display'] (cfg['sandbox-edit-link-display'] | cfg['compare-link-display'])
 +
--
 +
-- If the sandbox doesn't exist, it is in the format:
 +
--
 +
--    cfg['sandbox-link-display'] (cfg['sandbox-create-link-display'] | cfg['mirror-link-display'])
 +
--
 +
-- The link for cfg['sandbox-create-link-display'] link preloads the page with cfg['template-sandbox-preload']
 +
-- or cfg['module-sandbox-preload'], depending on the current namespace. The link for cfg['mirror-link-display']
 +
-- loads a default edit summary of cfg['mirror-edit-summary'].
 +
--
 +
-- $2 is a link to the test cases page. If the test cases page exists, it is in the following format:
 +
--
 +
--    cfg['testcases-link-display'] (cfg['testcases-edit-link-display'])
 +
--
 +
-- If the test cases page doesn't exist, it is in the format:
 +
--
 +
--    cfg['testcases-link-display'] (cfg['testcases-create-link-display'])
 +
--
 +
-- If the test cases page doesn't exist, the link for cfg['testcases-create-link-display'] preloads the
 +
-- page with cfg['template-testcases-preload'] or cfg['module-testcases-preload'], depending on the current
 +
-- namespace.
 +
--]]
 +
cfg['experiment-blurb-template'] = format('experiment-blurb-template')
 +
cfg['experiment-blurb-module'] = format('experiment-blurb-module')
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Sandbox link configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['sandbox-subpage']
 +
-- The name of the template subpage typically used for sandboxes.
 +
cfg['sandbox-subpage'] = 'sandbox'
 +
 
 +
-- cfg['template-sandbox-preload']
 +
-- Preload file for template sandbox pages.
 +
cfg['template-sandbox-preload'] = 'Template:Documentation/preload-sandbox'
 +
 
 +
-- cfg['module-sandbox-preload']
 +
-- Preload file for Lua module sandbox pages.
 +
cfg['module-sandbox-preload'] = 'Template:Documentation/preload-module-sandbox'
 +
 
 +
-- cfg['sandbox-link-display']
 +
-- The text to display for "sandbox" links.
 +
cfg['sandbox-link-display'] = format('sandbox-link-display')
 +
 
 +
-- cfg['sandbox-edit-link-display']
 +
-- The text to display for sandbox "edit" links.
 +
cfg['sandbox-edit-link-display'] = format('sandbox-edit-link-display')
 +
 
 +
-- cfg['sandbox-create-link-display']
 +
-- The text to display for sandbox "create" links.
 +
cfg['sandbox-create-link-display'] = format('sandbox-create-link-display')
 +
 
 +
-- cfg['compare-link-display']
 +
-- The text to display for "compare" links.
 +
cfg['compare-link-display'] = format('compare-link-display')
 +
 
 +
-- cfg['mirror-edit-summary']
 +
-- The default edit summary to use when a user clicks the "mirror" link. $1 is a wikilink to the
 +
-- template page.
 +
cfg['mirror-edit-summary'] = 'Create sandbox version of $1'
 +
 
 +
-- cfg['mirror-link-display']
 +
-- The text to display for "mirror" links.
 +
cfg['mirror-link-display'] = format('mirror-link-display')
 +
 
 +
-- cfg['mirror-link-preload']
 +
-- The page to preload when a user clicks the "mirror" link.
 +
cfg['mirror-link-preload'] = 'Template:Documentation/mirror'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Test cases link configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['testcases-subpage']
 +
-- The name of the template subpage typically used for test cases.
 +
cfg['testcases-subpage'] = 'testcases'
 +
 
 +
-- cfg['template-testcases-preload']
 +
-- Preload file for template test cases pages.
 +
cfg['template-testcases-preload'] = 'Template:Documentation/preload-testcases'
 +
 
 +
-- cfg['module-testcases-preload']
 +
-- Preload file for Lua module test cases pages.
 +
cfg['module-testcases-preload'] = 'Template:Documentation/preload-module-testcases'
 +
 
 +
-- cfg['testcases-link-display']
 +
-- The text to display for "testcases" links.
 +
cfg['testcases-link-display'] = format('testcases-link-display')
 +
 
 +
-- cfg['testcases-edit-link-display']
 +
-- The text to display for test cases "edit" links.
 +
cfg['testcases-edit-link-display'] = format('testcases-edit-link-display')
 +
 
 +
-- cfg['testcases-create-link-display']
 +
-- The text to display for test cases "create" links.
 +
cfg['testcases-create-link-display'] = format('testcases-create-link-display')
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Add categories blurb configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
--[[
 +
-- cfg['add-categories-blurb']
 +
-- Text to direct users to add categories to the /doc subpage. Not used if the "content" or
 +
-- "docname fed" arguments are set, as then it is not clear where to add the categories. $1 is a
 +
-- link to the /doc subpage with a display value of cfg['doc-link-display'].
 +
--]]
 +
cfg['add-categories-blurb'] = format('add-categories-blurb')
 +
 
 +
-- cfg['doc-link-display']
 +
-- The text to display when linking to the /doc subpage.
 +
cfg['doc-link-display'] = '/doc'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Subpages link configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
--[[
 +
-- cfg['subpages-blurb']
 +
-- The "Subpages of this template" blurb. $1 is a link to the main template's subpages with a
 +
-- display value of cfg['subpages-link-display']. In the English version this blurb is simply
 +
-- the link followed by a period, and the link display provides the actual text.
 +
--]]
 +
cfg['subpages-blurb'] = format('subpages-blurb')
 +
 
 +
--[[
 +
-- cfg['subpages-link-display']
 +
-- The text to display for the "subpages of this page" link. $1 is cfg['template-pagetype'],
 +
-- cfg['module-pagetype'] or cfg['default-pagetype'], depending on whether the current page is in
 +
-- the template namespace, the module namespace, or another namespace.
 +
--]]
 +
cfg['subpages-link-display'] = format('subpages-link-display')
 +
 
 +
-- cfg['template-pagetype']
 +
-- The pagetype to display for template pages.
 +
cfg['template-pagetype'] = format('template-pagetype')
 +
 
 +
-- cfg['module-pagetype']
 +
-- The pagetype to display for Lua module pages.
 +
cfg['module-pagetype'] = format('module-pagetype')
 +
 
 +
-- cfg['default-pagetype']
 +
-- The pagetype to display for pages other than templates or Lua modules.
 +
cfg['default-pagetype'] = format('default-pagetype')
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Doc link configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['doc-subpage']
 +
-- The name of the subpage typically used for documentation pages.
 +
cfg['doc-subpage'] = 'doc'
 +
 
 +
-- cfg['file-docpage-preload']
 +
-- Preload file for documentation page in the file namespace.
 +
cfg['file-docpage-preload'] = 'Template:Documentation/preload-filespace'
 +
 
 +
-- cfg['docpage-preload']
 +
-- Preload file for template documentation pages in all namespaces.
 +
cfg['docpage-preload'] = 'Template:Documentation/preload'
 +
 
 +
-- cfg['module-preload']
 +
-- Preload file for Lua module documentation pages.
 +
cfg['module-preload'] = 'Template:Documentation/preload-module-doc'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Print version configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['print-subpage']
 +
-- The name of the template subpage used for print versions.
 +
cfg['print-subpage'] = 'Print'
 +
 
 +
-- cfg['print-link-display']
 +
-- The text to display when linking to the /Print subpage.
 +
cfg['print-link-display'] = '/Print'
 +
 
 +
-- cfg['print-blurb']
 +
-- Text to display if a /Print subpage exists. $1 is a link to the subpage with a display value of cfg['print-link-display'].
 +
cfg['print-blurb'] = format('print-blurb')
 +
 
 +
-- cfg['display-print-category']
 +
-- Set to true to enable output of cfg['print-category'] if a /Print subpage exists.
 +
-- This should be a boolean value (either true or false).
 +
cfg['display-print-category'] = true
 +
 
 +
-- cfg['print-category']
 +
-- Category to output if cfg['display-print-category'] is set to true, and a /Print subpage exists.
 +
cfg['print-category'] = 'Templates with print versions'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- HTML and CSS configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['main-div-id']
 +
-- The "id" attribute of the main HTML "div" tag.
 +
cfg['main-div-id'] = 'template-documentation'
 +
 
 +
-- cfg['main-div-classes']
 +
-- The CSS classes added to the main HTML "div" tag.
 +
cfg['main-div-class'] = 'ts-doc-doc'
 +
cfg['header-div-class'] = 'ts-doc-header'
 +
cfg['heading-div-class'] = 'ts-doc-heading'
 +
cfg['content-div-class'] = 'ts-doc-content'
 +
cfg['footer-div-class'] = 'ts-doc-footer plainlinks'
 +
 
 +
cfg['sandbox-class'] = 'ts-doc-sandbox'
 +
 
 +
-- cfg['start-box-linkclasses']
 +
-- The CSS classes used for the [view][edit][history] or [create] links in the start box.
 +
cfg['start-box-linkclasses'] = 'ts-tlinks-tlinks mw-editsection-like plainlinks'
 +
 
 +
-- cfg['start-box-link-id']
 +
-- The HTML "id" attribute for the links in the start box.
 +
cfg['start-box-link-id'] = 'doc_editlinks'
 +
 
 +
----------------------------------------------------------------------------------------------------
 +
-- Tracking category configuration
 +
----------------------------------------------------------------------------------------------------
 +
 
 +
-- cfg['display-strange-usage-category']
 +
-- Set to true to enable output of cfg['strange-usage-category'] if the module is used on a /doc subpage
 +
-- or a /testcases subpage. This should be a boolean value (either true or false).
 +
cfg['display-strange-usage-category'] = true
 +
 
 +
-- cfg['strange-usage-category']
 +
-- Category to output if cfg['display-strange-usage-category'] is set to true and the module is used on a
 +
-- /doc subpage or a /testcases subpage.
 +
cfg['strange-usage-category'] = 'Wikipedia pages with strange ((documentation)) usage'
 +
 
 +
--[[
 +
----------------------------------------------------------------------------------------------------
 +
-- End configuration
 +
--
 +
-- Don't edit anything below this line.
 +
----------------------------------------------------------------------------------------------------
 +
--]]
 +
 
 +
return cfg

Latest revision as of 01:26, 5 November 2019

Documentation for this module may be created at Module:Documentation/config/doc

Script error: Lua error: Internal error: The interpreter has terminated with signal "11". 

----------------------------------------------------------------------------------------------------
--
--                               Configuration for Module:Documentation
--
-- Here you can set the values of the parameters and messages used in Module:Documentation to
-- localise it to your wiki and your language. Unless specified otherwise, values given here
-- should be string values.
----------------------------------------------------------------------------------------------------

local _format = require('Module:TNT').format
local function format(id)
	return _format('I18n/Documentation', id)
end

local cfg = {} -- Do not edit this line.

cfg['templatestyles-scr'] = 'Module:Documentation/styles.css'

----------------------------------------------------------------------------------------------------
-- Protection template configuration
----------------------------------------------------------------------------------------------------

-- cfg['protection-template']
-- The name of the template that displays the protection icon (a padlock on enwiki).
cfg['protection-template'] = 'pp-template'

-- cfg['protection-reason-edit']
-- The protection reason for edit-protected templates to pass to
-- [[Module:Protection banner]].
cfg['protection-reason-edit'] = 'template'

--[[
-- cfg['protection-template-args']
-- Any arguments to send to the protection template. This should be a Lua table.
-- For example, if the protection template is "pp-template", and the wikitext template invocation
-- looks like "{{pp-template|docusage=yes}}", then this table should look like "{docusage = 'yes'}".
 --]]
 cfg['protection-template-args'] = {docusage = 'yes'}

--[[
----------------------------------------------------------------------------------------------------
-- Sandbox notice configuration
--
-- On sandbox pages the module can display a template notifying users that the current page is a
-- sandbox, and the location of test cases pages, etc. The module decides whether the page is a
-- sandbox or not based on the value of cfg['sandbox-subpage']. The following settings configure the
-- messages that the notices contains.
----------------------------------------------------------------------------------------------------
--]]

-- cfg['sandbox-notice-image']
-- The image displayed in the sandbox notice.
cfg['sandbox-notice-image'] = '[[Image:Edit In Sandbox Icon - Color.svg|40px|alt=|link=]]'

--[[
-- cfg['sandbox-notice-pagetype-template']
-- cfg['sandbox-notice-pagetype-module']
-- cfg['sandbox-notice-pagetype-other']
-- The page type of the sandbox page. The message that is displayed depends on the current subject
-- namespace. This message is used in either cfg['sandbox-notice-blurb'] or
-- cfg['sandbox-notice-diff-blurb'].
--]]
cfg['sandbox-notice-pagetype-template'] = format('sandbox-notice-pagetype-template')
cfg['sandbox-notice-pagetype-module'] = format('sandbox-notice-pagetype-module')
cfg['sandbox-notice-pagetype-other'] = format('sandbox-notice-pagetype-other')

--[[
-- cfg['sandbox-notice-blurb']
-- cfg['sandbox-notice-diff-blurb']
-- cfg['sandbox-notice-diff-display']
-- Either cfg['sandbox-notice-blurb'] or cfg['sandbox-notice-diff-blurb'] is the opening sentence
-- of the sandbox notice. The latter has a diff link, but the former does not. $1 is the page
-- type, which is either cfg['sandbox-notice-pagetype-template'],
-- cfg['sandbox-notice-pagetype-module'] or cfg['sandbox-notice-pagetype-other'] depending what
-- namespace we are in. $2 is a link to the main template page, and $3 is a diff link between
-- the sandbox and the main template. The display value of the diff link is set by 
-- cfg['sandbox-notice-compare-link-display'].
--]]
cfg['sandbox-notice-blurb'] = format('sandbox-notice-blurb')
cfg['sandbox-notice-diff-blurb'] = format('sandbox-notice-diff-blurb')
cfg['sandbox-notice-compare-link-display'] = format('sandbox-notice-compare-link-display')

--[[
-- cfg['sandbox-notice-testcases-blurb']
-- cfg['sandbox-notice-testcases-link-display']
-- cfg['sandbox-notice-testcases-run-blurb']
-- cfg['sandbox-notice-testcases-run-link-display']
-- cfg['sandbox-notice-testcases-blurb'] is a sentence notifying the user that there is a test cases page
-- corresponding to this sandbox that they can edit. $1 is a link to the test cases page.
-- cfg['sandbox-notice-testcases-link-display'] is the display value for that link.
-- cfg['sandbox-notice-testcases-run-blurb'] is a sentence notifying the user that there is a test cases page
-- corresponding to this sandbox that they can edit, along with a link to run it. $1 is a link to the test
-- cases page, and $2 is a link to the page to run it.
-- cfg['sandbox-notice-testcases-run-link-display'] is the display value for the link to run the test
-- cases.
--]]
cfg['sandbox-notice-testcases-blurb'] = format('sandbox-notice-testcases-blurb')
cfg['sandbox-notice-testcases-link-display'] = format('sandbox-notice-testcases-link-display')
cfg['sandbox-notice-testcases-run-blurb'] = format('sandbox-notice-testcases-run-blurb')
cfg['sandbox-notice-testcases-run-link-display'] = format('sandbox-notice-testcases-run-link-display')

-- cfg['sandbox-category']
-- A category to add to all template sandboxes.
cfg['sandbox-category'] = 'Template sandboxes'

----------------------------------------------------------------------------------------------------
-- Start box configuration
----------------------------------------------------------------------------------------------------

-- cfg['documentation-icon-wikitext']
-- The wikitext for the icon shown at the top of the template.
cfg['documentation-icon-wikitext'] = '[[File:Test Template Info-Icon - Version (2).svg|50px|link=|alt=Documentation icon]]'

----------------------------------------------------------------------------------------------------
-- Link box (end box) configuration
----------------------------------------------------------------------------------------------------

-- cfg['transcluded-from-blurb']
-- Notice displayed when the docs are transcluded from another page. $1 is a wikilink to that page.
cfg['transcluded-from-blurb'] = format('transcluded-from-blurb')

--[[
-- cfg['create-module-doc-blurb']
-- Notice displayed in the module namespace when the documentation subpage does not exist.
-- $1 is a link to create the documentation page with the preload cfg['module-preload'] and the
-- display cfg['create-link-display'].
--]]
cfg['create-module-doc-blurb'] = format('create-module-doc-blurb')

----------------------------------------------------------------------------------------------------
-- Experiment blurb configuration
----------------------------------------------------------------------------------------------------

--[[
-- cfg['experiment-blurb-template']
-- cfg['experiment-blurb-module']
-- The experiment blurb is the text inviting editors to experiment in sandbox and test cases pages.
-- It is only shown in the template and module namespaces. With the default English settings, it
-- might look like this:
--
-- Editors can experiment in this template's sandbox (edit | diff) and testcases (edit) pages.
--
-- In this example, "sandbox", "edit", "diff", "testcases", and "edit" would all be links.
--
-- There are two versions, cfg['experiment-blurb-template'] and cfg['experiment-blurb-module'], depending
-- on what namespace we are in.
-- 
-- Parameters:
--
-- $1 is a link to the sandbox page. If the sandbox exists, it is in the following format:
--
--     cfg['sandbox-link-display'] (cfg['sandbox-edit-link-display'] | cfg['compare-link-display'])
-- 
-- If the sandbox doesn't exist, it is in the format:
--
--     cfg['sandbox-link-display'] (cfg['sandbox-create-link-display'] | cfg['mirror-link-display'])
-- 
-- The link for cfg['sandbox-create-link-display'] link preloads the page with cfg['template-sandbox-preload']
-- or cfg['module-sandbox-preload'], depending on the current namespace. The link for cfg['mirror-link-display']
-- loads a default edit summary of cfg['mirror-edit-summary'].
--
-- $2 is a link to the test cases page. If the test cases page exists, it is in the following format:
--
--     cfg['testcases-link-display'] (cfg['testcases-edit-link-display'])
--
-- If the test cases page doesn't exist, it is in the format:
-- 
--     cfg['testcases-link-display'] (cfg['testcases-create-link-display'])
--
-- If the test cases page doesn't exist, the link for cfg['testcases-create-link-display'] preloads the
-- page with cfg['template-testcases-preload'] or cfg['module-testcases-preload'], depending on the current
-- namespace.
--]]
cfg['experiment-blurb-template'] = format('experiment-blurb-template')
cfg['experiment-blurb-module'] = format('experiment-blurb-module')

----------------------------------------------------------------------------------------------------
-- Sandbox link configuration
----------------------------------------------------------------------------------------------------

-- cfg['sandbox-subpage']
-- The name of the template subpage typically used for sandboxes.
cfg['sandbox-subpage'] = 'sandbox'

-- cfg['template-sandbox-preload']
-- Preload file for template sandbox pages.
cfg['template-sandbox-preload'] = 'Template:Documentation/preload-sandbox'

-- cfg['module-sandbox-preload']
-- Preload file for Lua module sandbox pages.
cfg['module-sandbox-preload'] = 'Template:Documentation/preload-module-sandbox'

-- cfg['sandbox-link-display']
-- The text to display for "sandbox" links.
cfg['sandbox-link-display'] = format('sandbox-link-display')

-- cfg['sandbox-edit-link-display']
-- The text to display for sandbox "edit" links.
cfg['sandbox-edit-link-display'] = format('sandbox-edit-link-display')

-- cfg['sandbox-create-link-display']
-- The text to display for sandbox "create" links.
cfg['sandbox-create-link-display'] = format('sandbox-create-link-display')

-- cfg['compare-link-display']
-- The text to display for "compare" links.
cfg['compare-link-display'] = format('compare-link-display')

-- cfg['mirror-edit-summary']
-- The default edit summary to use when a user clicks the "mirror" link. $1 is a wikilink to the
-- template page.
cfg['mirror-edit-summary'] = 'Create sandbox version of $1'

-- cfg['mirror-link-display']
-- The text to display for "mirror" links.
cfg['mirror-link-display'] = format('mirror-link-display')

-- cfg['mirror-link-preload']
-- The page to preload when a user clicks the "mirror" link.
cfg['mirror-link-preload'] = 'Template:Documentation/mirror'

----------------------------------------------------------------------------------------------------
-- Test cases link configuration
----------------------------------------------------------------------------------------------------

-- cfg['testcases-subpage']
-- The name of the template subpage typically used for test cases.
cfg['testcases-subpage'] = 'testcases'

-- cfg['template-testcases-preload']
-- Preload file for template test cases pages.
cfg['template-testcases-preload'] = 'Template:Documentation/preload-testcases'

-- cfg['module-testcases-preload']
-- Preload file for Lua module test cases pages.
cfg['module-testcases-preload'] = 'Template:Documentation/preload-module-testcases'

-- cfg['testcases-link-display']
-- The text to display for "testcases" links.
cfg['testcases-link-display'] = format('testcases-link-display')

-- cfg['testcases-edit-link-display']
-- The text to display for test cases "edit" links.
cfg['testcases-edit-link-display'] = format('testcases-edit-link-display')

-- cfg['testcases-create-link-display']
-- The text to display for test cases "create" links.
cfg['testcases-create-link-display'] = format('testcases-create-link-display')

----------------------------------------------------------------------------------------------------
-- Add categories blurb configuration
----------------------------------------------------------------------------------------------------

--[[
-- cfg['add-categories-blurb']
-- Text to direct users to add categories to the /doc subpage. Not used if the "content" or
-- "docname fed" arguments are set, as then it is not clear where to add the categories. $1 is a
-- link to the /doc subpage with a display value of cfg['doc-link-display'].
--]]
cfg['add-categories-blurb'] = format('add-categories-blurb')

-- cfg['doc-link-display']
-- The text to display when linking to the /doc subpage.
cfg['doc-link-display'] = '/doc'

----------------------------------------------------------------------------------------------------
-- Subpages link configuration
----------------------------------------------------------------------------------------------------

--[[
-- cfg['subpages-blurb']
-- The "Subpages of this template" blurb. $1 is a link to the main template's subpages with a
-- display value of cfg['subpages-link-display']. In the English version this blurb is simply
-- the link followed by a period, and the link display provides the actual text.
--]]
cfg['subpages-blurb'] = format('subpages-blurb')

--[[
-- cfg['subpages-link-display']
-- The text to display for the "subpages of this page" link. $1 is cfg['template-pagetype'],
-- cfg['module-pagetype'] or cfg['default-pagetype'], depending on whether the current page is in
-- the template namespace, the module namespace, or another namespace.
--]]
cfg['subpages-link-display'] = format('subpages-link-display')

-- cfg['template-pagetype']
-- The pagetype to display for template pages.
cfg['template-pagetype'] = format('template-pagetype')

-- cfg['module-pagetype']
-- The pagetype to display for Lua module pages.
cfg['module-pagetype'] = format('module-pagetype')

-- cfg['default-pagetype']
-- The pagetype to display for pages other than templates or Lua modules.
cfg['default-pagetype'] = format('default-pagetype')

----------------------------------------------------------------------------------------------------
-- Doc link configuration
----------------------------------------------------------------------------------------------------

-- cfg['doc-subpage']
-- The name of the subpage typically used for documentation pages.
cfg['doc-subpage'] = 'doc'

-- cfg['file-docpage-preload']
-- Preload file for documentation page in the file namespace.
cfg['file-docpage-preload'] = 'Template:Documentation/preload-filespace'

-- cfg['docpage-preload']
-- Preload file for template documentation pages in all namespaces.
cfg['docpage-preload'] = 'Template:Documentation/preload'

-- cfg['module-preload']
-- Preload file for Lua module documentation pages.
cfg['module-preload'] = 'Template:Documentation/preload-module-doc'

----------------------------------------------------------------------------------------------------
-- Print version configuration
----------------------------------------------------------------------------------------------------

-- cfg['print-subpage']
-- The name of the template subpage used for print versions.
cfg['print-subpage'] = 'Print'

-- cfg['print-link-display']
-- The text to display when linking to the /Print subpage.
cfg['print-link-display'] = '/Print'

-- cfg['print-blurb']
-- Text to display if a /Print subpage exists. $1 is a link to the subpage with a display value of cfg['print-link-display'].
cfg['print-blurb'] = format('print-blurb')

-- cfg['display-print-category']
-- Set to true to enable output of cfg['print-category'] if a /Print subpage exists.
-- This should be a boolean value (either true or false).
cfg['display-print-category'] = true

-- cfg['print-category']
-- Category to output if cfg['display-print-category'] is set to true, and a /Print subpage exists.
cfg['print-category'] = 'Templates with print versions'

----------------------------------------------------------------------------------------------------
-- HTML and CSS configuration
----------------------------------------------------------------------------------------------------

-- cfg['main-div-id']
-- The "id" attribute of the main HTML "div" tag.
cfg['main-div-id'] = 'template-documentation'

-- cfg['main-div-classes']
-- The CSS classes added to the main HTML "div" tag.
cfg['main-div-class'] = 'ts-doc-doc'
cfg['header-div-class'] = 'ts-doc-header'
cfg['heading-div-class'] = 'ts-doc-heading'
cfg['content-div-class'] = 'ts-doc-content'
cfg['footer-div-class'] = 'ts-doc-footer plainlinks'

cfg['sandbox-class'] = 'ts-doc-sandbox'

-- cfg['start-box-linkclasses']
-- The CSS classes used for the [view][edit][history] or [create] links in the start box.
cfg['start-box-linkclasses'] = 'ts-tlinks-tlinks mw-editsection-like plainlinks'

-- cfg['start-box-link-id']
-- The HTML "id" attribute for the links in the start box.
cfg['start-box-link-id'] = 'doc_editlinks'

----------------------------------------------------------------------------------------------------
-- Tracking category configuration
----------------------------------------------------------------------------------------------------

-- cfg['display-strange-usage-category']
-- Set to true to enable output of cfg['strange-usage-category'] if the module is used on a /doc subpage
-- or a /testcases subpage. This should be a boolean value (either true or false).
cfg['display-strange-usage-category'] = true

-- cfg['strange-usage-category']
-- Category to output if cfg['display-strange-usage-category'] is set to true and the module is used on a
-- /doc subpage or a /testcases subpage.
cfg['strange-usage-category'] = 'Wikipedia pages with strange ((documentation)) usage'

--[[
----------------------------------------------------------------------------------------------------
-- End configuration
--
-- Don't edit anything below this line.
----------------------------------------------------------------------------------------------------
--]]

return cfg
Retrieved from "https://www.skaldsongrp.com/wiki/index.php?title=Module:Documentation/config&oldid=77221"